YGM Series Suspension Mill
Many proprietary technologies are used in the high pressure suspension mill.The pressure device with high pressure spring can improve the grinding pressure of roller and increase the efficiency by 10%-20%.And the sealing performance and dust removal effect are very good.
Applications:Cement, coal, power plant desulfurization, metallurgy, chemical industry, non-metallic mineral, construction material, ceramics.
Upon entering the grinding chamber, the material is lifted with a spade and ground between the roller and the ring.The crushed material goes into the separator together with the air from the blower. The qualified fine powder becomes the final product and goes into the cyclone dust collector. Other unqualified dust falls down and is ground again.The circulating air returns to the blower and the process is repeated, with the remaining air going into the bag filter to protect the environment.
Learn More About Liming YGM Series Suspension Mill
1.Compared with other mills, its production capacity is increased by 10%-20% under the same power condition. Under the action of high pressure spring, the compression force of the roller on the material is increased by 800-1200kgf.
2.The final product size can be 0.613 mm (30 mesh) to 0.033 mm (425 mesh).Some can be as thin as 0.013mm (1000 mesh).
3.High pressure suspension mill meets the requirements of national dust emission standards.
4.The separator is very easy to adjust.
5.Adopt multi-stage sealing to make the grinding equipment airtight.